BluePeak Single Tank system: one tank of softener resin and catalytic carbon beside its brine tank, cut away to show the media
City water

Single Tank (Whole-Home Filter + Softener, one tank)

One tank that softens and filters: whole house water filtration and softening together. Softening resin and catalytic carbon share a single mixed bed, so hardness, chlorine and chloramine are handled together in the footprint of one tank. Sized for homes with up to 3 bathrooms or 6 people.

up to 3 bathrooms or 6 people

Regular price$4,075Sale price$2,649

Installed

35% Off + Free RO Drinking System · ends November 30, 2026

Free tank-style Reverse Osmosis Drinking System included

Every price is the installed price. We confirm your price with you on the call, before any work begins.

Key specs

Best for
up to 3 bathrooms or 6 people
Water
City water
System
Softener + carbon
Tank
10" × 60" mixed bed
Capacity
36,000 grains
Flow
8–12 GPM (10" tank)
Warranty
Valve moving parts covered as long as you own the home

Not sure? We size it to how your family actually uses water.

Tap to zoom

Direct downloads. No form, no email required.

Preview of the Single Tank (Whole-Home Filter + Softener, one tank) brochurePreview of the Single Tank (Whole-Home Filter + Softener, one tank) brochure

Full specifications

Key specifications

Best forup to 3 bathrooms or 6 people
WaterCity water
Softening capacity36,000 grains
Media tank (D × H)10" × 60"
Media volume1.125 cu ft resin + carbon
Brine / salt tank15" × 35" square
Connections1" NPT elbows · 1.25" distributor tube
Bypass valve1" full-flow, included
Service flow rate8–12 GPM (10" tank)
Valve flow rate28 GPM

Operating requirements

Operating pressure30 – 125 PSI
Water temperature40° – 110°F (4° – 43°C)
Electrical120V / 60Hz — 12V 650mA transformer
Inlet turbidityUnder 5 FTU
Service flow8–12 GPM (10" tank)
Backwash flow3.0 gal/min
RegenerationUpflow counter-current, demand-initiated metering

What the catalytic carbon reduces

  • Chlorine and chloramines
  • THMs & byproducts
  • VOCs
  • Pesticides and herbicides
  • Hydrogen sulfide odor
  • Taste and odor
  • Hardness (via resin)

Components and warranty

Control valveBluePeak ProValve — Hankscraft ceramic disc, assembled in Wisconsin, 72-hour memory backup
Mineral tankEnpress fiberglass pressure tank — made in Ohio · NSF-certified polishing gravel support bed
Softening resinResinTech CG10 strong-acid cation, 10% crosslinked — New Jersey, WQA Gold Seal
Carbon mediaJacobi AquaSorb CX-MCA catalytic coconut-shell carbon — steam-activated, NSF/ANSI 61 & 42
Carbon gradeCatalytic (chloramine + H₂S); iodine ≥1,000 mg/g; 1,050 m²/g surface area
AssemblyAssembled in Texas
CertificationsCertified to NSF/ANSI 42, 44 and 61
WarrantyValve moving parts for as long as you own the home · electronics 5 years · media, RO and install 1 year · tanks per manufacturer
InstallationIncluded — by a licensed North Carolina plumber
Drinking waterFree reverse osmosis drinking system included, installed at the kitchen sink

Real installs

This system, installed by BluePeak in Triangle homes. Select a photo to enlarge it.

  • BluePeak Single Tank system with its brine tank, installed in a garage alcove in Raleigh
    Single Tank · Raleigh

See the full install gallery ›

What it does

Every drop entering the house passes through one 10 x 60 inch tank holding a mixed bed: 1.125 cubic feet of ResinTech CG10 softening resin and Jacobi catalytic coconut-shell carbon, together. The resin takes out the calcium and magnesium behind scale, spotting and soap that will not rinse. The catalytic carbon takes out the chlorine or chloramine your utility adds, along with the taste and the smell that come with it.

Catalytic carbon matters here specifically. Standard carbon handles free chlorine easily. Chloramine, which some utilities use because it lasts longer in the pipes, needs catalytic carbon. The resin is rated at 36,000 grains and recharges itself from the brine tank, and the BluePeak ProValve meters your water so it regenerates on what you actually use rather than on a timer.

Who it is for

City water homes with up to 3 bathrooms or 6 people that want both jobs done without giving up the floor space for two tanks. It is the common starting point for a house where the shower smells like a pool and the glasses come out of the dishwasher spotted.

For 4 or more bathrooms, or 8 or more people, the Single Tank XL is the same build in a larger tank with a third more capacity: the home decides between the two. Not sure? We size it to how your family actually uses water. The upgrade over either is the Dual Tank, which puts the softener and the carbon in separate tanks, so when the carbon wears out you replace only that tank. If you are on a well, this is the wrong category entirely.

Questions about this system

What’s the difference between a water softener and a water filter?

Different jobs. A softener uses resin and salt to remove calcium and magnesium — the minerals that cause scale, spotting and that film on your skin. A filter uses carbon or specialty media to remove chlorine, taste, odor and other contaminants. Softening doesn’t clean your water; filtering doesn’t soften it. Most Triangle city homes need filtering more than softening. Well homes often need both, plus more.

Single tank or dual tank — how do I know?

It comes down to how much water you use and what is in it. Our Single Tank puts softening resin and catalytic carbon together in one mixed bed, which suits city homes with up to 3 bathrooms or 6 people, and the Single Tank XL is the same build in a larger tank for 4 or more bathrooms or 8 or more people. A dual tank gives each media its own tank: a softener tank plus a catalytic carbon tank on city water, or on a well, a softener tank plus an iron and sulfur tank. On city water the Dual Tank is the upgrade rather than a size: when the carbon wears out you replace only that tank, and both last longer. Size decides between the Single Tank and the XL. We size it off your test and your household. Not sure? We size it to how your family actually uses water.

Will this hurt my water pressure?

A properly sized system, no. An undersized one, yes — which is the most common installation mistake in this industry. Our systems are sized on service flow rate against your household’s peak demand: 8–12 GPM from a 10-inch tank, 12–14 GPM from a 12-inch tank. If someone quotes you a system without asking how many people live in your home, that’s a red flag.

What maintenance does the system need?

Drinking water (RO) filters: about once a year. RO membrane: every 2 years. Salt: check monthly, top up as needed. UV bulb: every year. Pre-sediment cartridge: every 6 months.

Read the full Answer Center ›

Get your price without a home visit.

City water: no home visit. We pull your city's water report and price it on the phone. Community well: send us your yearly water report and we'll price it on the phone. Private well: send us any water test from the last couple of years, or we'll set up a water test for you.

35% Off + Free Reverse Osmosis Drinking System ($999 value)

Ends Nov 30.

City water or well?

By submitting, you also agree to our Terms of Service.

Call(984) 401-9826Claim 35% Off + Free RO

Ends Nov 30.Call now (984) 401-9826

BluePeak mascot holding a sign: Clean water doesn’t have to be a luxury

Every home deserves clean water.

And it doesn't have to break the bank.

35% off + a free drinking water system ($999 value). Ends Nov 30.

Takes 30 seconds. We'll text or call, your choice.

City water or well?

By submitting, you also agree to our Terms of Service.

We'll reach out to walk you through your options.